mX 1-10 with Solar Hybrid Collectors

Scope of delivery:

1. Commissioning and assuming the costs for an energy efficiency expert or a specialist contractor to prepare the so-called BzA (confirmation of application) – a confirmation to be submitted to the state-owned KfW bank that the planned project meets the KfW’s minimum technical requirements
   (Required to submit an application for heating subsidies to the state-owned KfW bank)
2. Delivery contract with agreement of a suspensive condition in accordance with the guidelines of the state-owned KfW bank – a reservation contract with a free right of withdrawal in the event that the KfW does not grant the purchaser/buyer a subsidy
   (Required to submit an application for heating subsidies to the state-owned KfW bank)
3. maXimus hybrid heat pump mX 1-10
   Modulating device indoor unit for heating and domestic water heating, with continuously adjustable Inverter technology and integrated high-efficiency circulation pumps, expansion vessels, safety devices, control components from well-known manufacturers and an attached hydrobox with integrated heating element
   Power control in heating mode: 1 – 10 kW
   Coefficient of performance (SCOP) in heating mode 1): 4.69
   Coefficient of performance (SCOP) in heating mode 2): 3.67
   (in conjunction with maXimus heating fence or solar hybrid collectors up to 6.0)
   Product guarantee 5 years
   Efficiency classes:
   Heating/drinking water heating 1): A+++
   Heating/drinking water heating 2): A++
   • (according to EN14511 under the conditions 0/-3° C and 30/35° C when operating with groundwater as a heat source)
   • (according to EN14511 under the conditions 0/-3° C and 50/55° C when operating with groundwater as a heat source)
4. Hygienic combination storage tank with integrated drinking water heating with 200 l capacity with attached high-efficiency circulation pump from a well-known manufacturer
5. 20 solar hybrid collectors
   425 watts electrical / 940 watts thermal per collector
   Product guarantee 10 years
   Performance guarantee 30 years to at least 87.40%
   Required substructure
   Required connecting hoses with plug&play connection
   1 LG ESS Home System 10.7 (battery storage + inverter)
6. Plug&play installation kit with all factory-prefabricated and already insulated assembly components (20 pieces) for complete, ready-to-use self-assembly
7. Installation accessories for Complete, ready-to-use self-assembly such as cartridge for the preparation of heating water in accordance with VDI 2035, 2 heating filling hoses of 2.5 m each, pipe cutter 3-28 mm, pipe deburrer 3-28 mm, adjustable wrench up to 12″, solar filling pump for drill/drill driver with 2 connection hoses of 2.5 m each, solar fluid 100 liters (Drill/drill driver is not included and must be provided by the customer/buyer!)
8. Acceptance of the self-installed system by a specialist company commissioned by the manufacturer or by the manufacturer’s customer service after self-assembly by the customer/buyer or a specialist company commissioned by him/herself and at his/her own expense.

*Registration of the heat pump and solar system (electricity side) with the local electricity network operator including changing the electricity meter and the electrical connection of the systems are not included in the scope of services; these (for the heat pump consisting of 2 separately fused CEE sockets with 32 A each, 5-pin, 400 V, at a maximum distance of 5 m from the heat pump internal unit) and for the solar system (electricity side as required) must be commissioned by the customer/buyer themselves and at their own expense from an electrical specialist company registered in the trade register and with the local electricity network operator!

After deducting the maximum KfW subsidy of 70% on the heat pump with accessories and the cost of the solar system proportionately on the hydraulic components, the investment costs for this product are just 18,720 euros including VAT!

If you wish, we can put you in touch with a competent heating specialist in your region who will take care of the hydraulic installation of your heat pump including dismantling your old heating system (without heating oil tanks) quickly and cleanly for a flat rate of 3,500 euros. You will also receive a maximum KfW subsidy of 70% on this, so that the installation costs in this case are just 1,050 euros!

And if you wish, we can put you in touch with a competent solar specialist in your region who will take care of the entire installation of your solar hybrid collector system quickly and cleanly for a flat rate. The solar specialist will prepare an offer after an on-site inspection. The installation costs for the hydraulic components are also subsidised by KfW by up to 70%.

Here are the highlights of the maXimus hybrid heat pump at a glance:

• Quality heat pump without an external unit
• High potential energy cost savings thanks to an efficiency of several hundred percent and up to 100% energy self-sufficient through your own electricity production
• Independent of rising costs of fossil fuels
• Suitable for operation with underfloor heating and/or radiators
• Suitable for classic residential buildings and small to medium-sized companies
• Short installation time of only around an hour without any specialist knowledge
• Due to their high efficiency, heat pumps meet all the requirements for replacing heating systems under the new Heating Act
• In addition, heat pumps already meet all the requirements of the regulations that will come into force on July 1, 2028 under the Building Energy Act (GEG) for the replacement of heating systems with fossil fuels.
• Your contribution to climate protection to protect your future generations
• Order now and the issue of heating renovation and power generation is off the table for you for the next 20 years