Maximus

mX 1-10 with Heating Fence Block – I

25.900,00 

Plug&Play self-assembly kit maXimus hybrid heat pump mX 1-10 with heating fence block (recommended for an annual heat requirement of up to 18,000 kWh and for heat distribution via underfloor heating and/or connection of a second heat generator)*

Scope of delivery:

  1. Commissioning and assuming the costs for an energy efficiency expert or a specialist contractor to prepare the so-called BzA (confirmation of application) – a confirmation to be submitted to the state-owned KfW bank that the planned project meets the KfW’s minimum technical requirements
    (Required to submit an application for heating subsidies to the state-owned KfW bank)
  2. Delivery contract with agreement of a suspensive condition in accordance with the guidelines of the state-owned KfW bank – a reservation contract with a free right of withdrawal in the event that the KfW does not grant the purchaser/buyer a subsidy
    (Required to submit an application for heating subsidies to the state-owned KfW bank)
  3. maXimus hybrid heat pump mX 1-10
    Modulating device indoor unit for heating and domestic water heating, with continuously adjustable Inverter technology and integrated high-efficiency circulation pumps, expansion vessels, safety devices, control components from well-known manufacturers and an attached hydrobox with integrated heating element
    Power control in heating mode: 1 – 10 kW
    Coefficient of performance (SCOP) in heating mode 1): 4.69
    Coefficient of performance (SCOP) in heating mode 2): 3.67
    (in conjunction with maXimus heating fence or solar hybrid collectors up to 6.0)
    Product guarantee 5 years
    Efficiency classes:
    Heating/drinking water heating 1): A+++
    Heating/drinking water heating 2): A++

    • (according to EN14511 under the conditions 0/-3° C and 30/35° C when operating with groundwater as a heat source)
    • (according to EN14511 under the conditions 0/-3° C and 50/55° C when operating with groundwater as a heat source)
  4. Buffer tank with an additional heat exchanger for connecting a second heat generator with a 200 l capacity with an attached high-efficiency circulation pump from a well-known manufacturer
  5. Heat pump hot water tank with a double-coil heat exchanger (2.56 m²) and an additional electric heating element (2.5 kW) with insulation separation and Schuko plug (230 volts) with a 200 l capacity
  6. Heating fence block (10 modules of 2 meters each) with 2 T-foundations and fastening set (connection material up to a maximum distance of 5 m from the heat pump indoor unit included, longer distances at an additional cost!)
  7. Plug&Play installation kit with all factory-prefabricated and already insulated assembly components (20 piece) for complete, ready-to-use self-assembly
  8. Installation accessories for complete, ready-to-use self-assembly such as cartridge for the preparation of heating water in accordance with VDI 2035, 2 heating filling hoses of 2.5 m each, pipe cutter 3-28 mm, pipe deburrer 3-28 mm, adjustable wrench up to 12″, solar filling pump for drill/drill driver with 2 connection hoses of 2.5 m each, solar fluid 350 liters (Drill/drill driver is not included and must be provided by the customer/buyer!)
  9. Acceptance of the self-installed system by a specialist company commissioned by the manufacturer or by the manufacturer’s customer service after self-assembly by the customer/buyer or a specialist company commissioned by him and at his own expense.

*Registration of the heat pump with the local electricity network operator including changing the electricity meter and the electrical connection of the system is not included in the scope of services; this (consisting of 2 separately fused CEE sockets with 32 A each, 5-pin, 400 V, at a maximum distance of 5 m from the heat pump internal unit) must be commissioned by the customer/buyer himself and at his own expense from an electrical specialist company registered in the trade register and with the local electricity network operator!

After deducting the maximum KfW subsidy of 70%, the investment costs for this product are just 7,770 euros including VAT!

If you wish, we can put you in touch with a competent heating specialist company in your region who will carry out the hydraulic installation of your system including dismantling your old heating system (without heating oil tanks) quickly and cleanly for a flat rate of 4,500 euros. You will also receive a maximum KfW subsidy of 70%, so that the installation costs in this case are just €1,350!

Here are the highlights of the maXimus hybrid heat pump at a glance:

  • Quality heat pump without an external unit
  • High potential energy cost savings thanks to an efficiency of several hundred percent
  • Independent of rising costs of fossil fuels
  • Suitable for operation with underfloor heating and/or radiators
  • Suitable for traditional residential buildings and small to medium-sized companies
  • Short installation time of just around an hour without any specialist knowledge
  • Due to their high efficiency, heat pumps meet all the requirements for replacing heating systems in accordance with the new heating law
  • In addition, heat pumps already meet all the requirements for the heating system that will come into force on July 1st Regulations coming into force in 2028 under the Building Energy Act (GEG) for the replacement of heating systems with fossil fuels.
  • Your contribution to climate protection to protect your future generations
  • Order now and the issue of heating renovation is off the table for you for the next 20 years

Reviews

There are no reviews yet.

Be the first to review “mX 1-10 with Heating Fence Block – I”

Your email address will not be published. Required fields are marked *

Scroll to Top